These two products were designed by the engineers who developed the original MS-20. At its introduction, the MS-20 was developed by just a few people with the goal of creating an interesting product in a short time; the result was an enormous hit, but there were actually a few things that the original designers had left undone. Now, after 37 years, the MS-20M Kit has been completed.
The MS-20M Kit is based on the MS-20 with additional improvements; it's a analog synthesizer module that you can assemble yourself. In addition to greatly enhanced synthesis possibilities provided by oscillator sync, FM, two filters (pre and post), and PWM, there are jacks such as a CV IN that supports both Hz/V and V/Oct, making it play nicely with other equipment. You'll be able to immerse yourself in synthesis, and since the SQ-1 step sequencer is also included, you can also create and play sequences.
In conjunction with the revival of the MS-20 series, the designers wanted to take one additional step. And now, we bring you the flagship model of the MS synthesizer series as a user-assembled kit.
Carrying on the distinctive synthesis of the MS-20, the Korg MS-20M features additional improvements. Extending to detailed aspects of the design, the sound-creating possibilities have been dramatically boosted, making this sound module even more attractive and raising it to an even higher state of completion.
SYNC ON/OFF switch allows oscillator sync Oscillator sync forcibly synchronizes the phase of VCO1 to the phase of VCO2, producing a powerful sound with complex overtones.
FM ON/OFF switch allows frequency modulation The VCO1 waveform can be used to frequency-modulate the VCO2 waveform (FM or cross modulation), creating vibrato effects or extreme metallic sounds.
FILTER TYPE switch lets you select two types of filter The original MS-20 used two different VCF circuits depending on the date of production, and now you can choose either of these with a single switch. The earlier model (REV.1) has an aggressive character with distinctive distortion and self-oscillation, while the later model (REV.2) has minimal noise and a sweet, mellow sound.
PWM IN jack allows pulse width modulation The PWM provided on the MS-10 of the past is now possible on the MS-20. By cyclically modulating the pulse width of the VCO1 square wave, you can obtain a distinctively fat sound.
EG2 NORMAL OUT jack expands your sound-creating potential In addition to the previous EG2 REV OUT, we've provided a normal EG2 OUT that varies in the range of 0V--+5V.
TRIG SW button lets you conveniently audition the sound Even on this keyboardless unit, the trigger switch lets you smoothly audition the sound while you edit the parameters.
A rich array of jacks to control a variety of devices Numerous jacks have been added to the MS-20M, letting you connect it with any type of device.
All CV/GATE specifications are supported: Hz/V and V/Oct, S-Trig and V-Trig
From the time when it was originally produced, the CV standard used by the MS-20 was not the commonly used V/Oct standard, but rather the Hz/V standard that provided superior pitch stability. However, like the MS-50 of that time, the MS-20M Kit provides CV IN jacks for both the Hz/V standard and the V/Oct standard.
For the TRIG IN jack that receives gate signals, jacks are provided not only for the S-Trig standard as on the original MS-20, but also for the widely used V-Trig standard. The MS-20M Kit supports any sequencer or controller that's equipped with CV/GATE output.
Three JUNCTION jacks Three sets of the junction jacks once provided by the MS-50 are also provided. Output signals from the SQ-1 step sequencer or similar device can be converted from a mini-phone plug to a 1/4" phone plug, or those signals can be distributed to multiple destinations for a variety of possibilities.
MIDI IN connector and USB connector There's a MIDI IN connector that can receive note messages, and a USB-MIDI connector that can transmit and receive note messages. You can perform using a taktile or other MIDI keyboard, or perform sequences that you've recorded on your DAW.
User-assembled kit with luxurious wooden side panels The full-sized body supports 1/4" plugs and projects an aura of solidity. The side panels are luxurious wood, giving this unit some serious presence on your desk.
The MS-20M is a user-assembled kit. There is no need for any tricky soldering or knowledge of electronic circuits. Just by installing screws and fitting parts together, you'll get your very own analog sound.
SQ-1 step sequencer is included The 2 x 8 step SQ-1 step sequencer is included. From the day you assemble the unit, you'll be able to immerse yourself in a limitless world of synthesis and sequencing.
Package contents of MS-20 Kit Top panel, Bottom panel, Left side pane, Right side panel, Spacer sheet, Junction circuit board (small), Junction circuit board (large), Rear jack circuit board unit, VR circuit board (small), VR circuit board (large)
Korg MS-20M Module Features: - Significantly powered-up synthesis
- SYNC ON/OFF switch allows oscillator sync
- FM ON/OFF switch allows frequency modulation
- FILTER TYPE switch selects two filter types
- PWM IN jack allows pulse width modulation
- EG2 NORMAL OUT expands your sonic possibilities
- TRIG SW button is a convenient way to audition the sound
- Plentiful connectors to control the sound from various devices
- Supports all CV/GATE specifications: Hz/V and V/Oct, S-Trig and V-Trig
- Three JUNCTION jacks
- MIDI IN connector and USB MIDI connector
- User-assembled kit with luxurious side panels
- SQ-1 step sequencer included
The includes a 1 Year return to base warranty. This warranty applies to all equipment which has developed a manufacturer defect during application. Please contact us to confirm the availability and lowest price for any product. For quotes and price matching requests, contact us and include the competing website address.
|Condition||Sealed / New|
|Free Shipping||Hong Kong|
|Delivered HKD Price||Shown at checkout|
Look no further than AudioBuy when buying gear online in Hong Kong , always at the lowest price with free shipping to all locations serviced by FEDEX. Please contact us for stock availability , price quotes , expedited shipping quotes or to arrange a return of your (for the full purchase price of ). You may return most new, unopened items within 30 days of delivery for a full refund. AudioBuy Hong Kong are very proud to carry a large selection of gear. You demand quality, reliability, and innovative design from your gear, and we're here to help you find exactly what you need. We're glad to answer any questions you have and you can always depend on AudioBuy Hong Kong to give you the best possible value on musical instruments and accessories with responsive customer service.
All payments are processed securely by Paypal , offering both buyer and seller protection. Online orders are confirmed in stock and ready to ship before Paypal payment is completed. orders ship FEDEX and will require signature upon delivery. Orders are typically delivered within 4-5 business days following dispatch. Fedex tracking details are provided for all orders.
Hong Kong is a free port and does not levy any duty on imports (or exports). There is also no sales tax or other import charges. The total delivered price for delivery to Hong Kong will be . Detailed information on import declaration procedures and import restrictions can be found at the Hong Kong Customs website.
- Buy products with confidence.
- Ships to most locations in Hong Kong including Kowloon , Tsuen Wan and Yuen Long.
- Return to base repair or replacement (1 Year return to base).
- Please contact AudioBuy.hk Hong Kong for detailed information about our warranty terms and conditions.